IndustrialTool.com

Sterling Saw Blades
Bi-Metal Shatterproof Hand Hacksaw Blades

STERLING HAND HACKSAW BLADES
The Bi-Metal hand hack is the ideal combination of high, red heat hardness on the cutting edge, joined to a tough, alloy steel back with great strength and stretch resistance. This combination, made possible by electron beam welding, gives performance never before attainable in any hand hacksaw blade. Its bi-metal design creates a shatter resistant blade with the ability to cut faster and longer because it stays shaper. The best blade possible for cutting all materials, including stainless steel, hardened alloys or anything that can be cut. Manufactured in standard tooth forms and varied pitch.

VARIED PITCH
The original blades with varied pitch design were patented and introduced by Diamond in 1937 in hand hacksaw blades. Over the years, improvements and variations have kept this blade on top in cutting ease and efficiency. No other blade cuts with "Generating Cutting Action" which contributes to long life and increased cutability. The Broach Tooth VARIED PITCH blade should be used whenever versatility is required because it is "Two Blades in One," cuts faster and easier and does a superior job on ferrous and nonferrous material, including the toughest machinable steels and alloys.

• Packaged 100 Per Box or 5 Per Vinyl Pouch (50 Per Master Pack)

Length	Width	THKNS.	T.P.I.	Qty. Per Pkg.	Product Number	Recommended Uses	Price Per Blade	Place Order
12"	1/2"	.025	14	5	10077-5	For metals heavier than 1/4", heacy angles, beams, rails, and for soft materials where maximum chip clearance is needed.	1.82	Order
12"	1/2"	.025	14	100	10077-10	For metals heavier than 1/4", heacy angles, beams, rails, and for soft materials where maximum chip clearance is needed.	1.76	Order
12"	1/2"	.025	18	5	10079-5	For metals 3/16" - 3/8", medium weight angles, channels, drill rod, machine steel, small solid stock etc., general shop use when cutting a variety of jobs.	1.82	Order
12"	1/2"	.025	18	100	10079-100	For metals 3/16" - 3/8", medium weight angles, channels, drill rod, machine steel, small solid stock etc., general shop use when cutting a variety of jobs.	1.76	Order
12"	1/2"	.025	24	5	10081-5	For metals 1/8" - 1/4", pipe, heavy tubing, light angles and channels, large wires, small drill rod, heavy gauge sheet metal.	1.82	Order
12"	1/2"	.025	24	100	10081-100	For metals 1/8" - 1/4", pipe, heavy tubing, light angles and channels, large wires, small drill rod, heavy gauge sheet metal.	1.76	Order
12"	1/2"	.025	32	5	10083-5	For metals thinner than 3/16", thin wall tubing, light sheet metal, and for hard or brittle materials.	1.82	Order
12"	1/2"	.025	32	100	10083-100	For metals thinner than 3/16", thin wall tubing, light sheet metal, and for hard or brittle materials.	1.76	Order
12"	1/2"	.025	18/14	5	10073-5	A versatile varied pitch blade for cutting a wider range of materials and cross sections from 1/4" - 3/4".	1.82	Order
12"	1/2"	.025	18/14	100	10073-100	A versatile varied pitch blade for cutting a wider range of materials and cross sections from 1/4" - 3/4".	1.76	Order
12"	1/2"	.025	24/20	5	10075-5	Varied pitch for ease and efficiency of cutting. Use on sections 3/16" - 3/8" thin wall tubing, sheet metal, etc.	1.82	Order
12"	1/2"	.025	24/20	100	10075-100	Varied pitch for ease and efficiency of cutting. Use on sections 3/16" - 3/8" thin wall tubing, sheet metal, etc.	1.76	Order